Wiki
Wiki
This is an old revision of the document!
This system is designed to have two crates if extende to full 128 AC-Trafo capacity.
2 PXI-Crates (currently only 1):
2 PXI-Controller (currently only one):
16 PXI-ADC board “PXI6133” (currently 9):
2 PXI-FGA board “PXI7811R” (currently 1):
(A) 16x cables type “SH68-68-EP” for connecting PXI-6133 to MAPS-Adapter:
(order number 184749-01 (1m) )
2x blauer 68-pin 0.050 D-Type — 68-pin 0.050 D-Type √
http://sine.ni.com/nips/cds/view/p/lang/en/nid/11799
wire mapping (interner Aufbau)→
http://digital.natinst.com/public.nsf/$CXIV/ATTACH-AEEE-883STQ/$FILE/SH68-68-EP.png
(B) 4x cables “SHC68-68-RDIO” for connecting PXI-7811R to MAPS-Adapter:
(order number 191667-01 (1m) )
blauer 68-pin 0.050 — silber VHDCI 68-pin male√
This cable can be used for conneting to SCB68 or a chassis cRIO-9151 for field IOs. It has 40 DIO lines each twisted with an DGND line (40). Therefore some of the DGND have to chair the same pins at only 68 pole conectors on both ends. It' s better sweeted with use of PXI-7811R.
http://sine.ni.com/nips/cds/view/p/lang/en/nid/203198
wire mapping (interner Aufbau)→
http://digital.natinst.com/public.nsf/$CXIV/ATTACH-AEEE-883R8C/$FILE/SHC68-68-RDIO.png
(C) 4x cables “SHC68-C68-S” for connecting PXI-7811R to MAPS-Interface:
(order number 186380C-0R5)
silber VHDCI 68-pin male — silber VHDCI 68-pin male √
http://sine.ni.com/nips/cds/view/p/lang/en/nid/206792
wire mapping (interner Aufbau)→
http://digital.natinst.com/public.nsf/$CXIV/ATTACH-AEEE-883QMB/$FILE/SHC68-68.png
Alternativ cable (currently used, 2 p.):
(B1) 4x cables “SH68-C68-S” for connecting PXI-7811R to MAPS-Adapter:
(order number 186381C-02 (2m))
blauer 68-pin 0.050 — silber VHDCI 68-pin male√
This cable is designed origionally for use with in and out goimg analog signals. Used with PXI-7811R there will be DIO lines twisted together pair wise that should not be handle this way.
http://sine.ni.com/nips/cds/view/p/lang/en/nid/206793
wire mapping (interner Aufbau)→
http://digital.ni.com/public.nsf/$CXIV/ATTACH-AEEE-8DBNQQ/$FILE/SH68-C68-S.PNG
This cable is to use together with counting device:
16x cable “SH68-68-D1” order number 183432 for counter boards:
blauer 68-pin 0.050 D-Type — 68-pin 0.050 D-Type
http://sine.ni.com/nips/cds/view/p/lang/en/nid/11801
wire mapping (interner Aufbau)→
http://digital.natinst.com/public.nsf/$CXIV/ATTACH-AEEE-883TMB/$FILE/SH6868-D1.png