User Tools

Site Tools


projects:maps:niequippment

This is an old revision of the document!


National Instruments Equippment used in this project:

NI-Crate and content

This system is designed to have two crates if extende to full 128 AC-Trafo capacity.

2 PXI-Crates (currently only 1):

2 PXI-Controller (currently only one):

16 PXI-ADC board “PXI6133” (currently 9):

2 PXI-FGA board “PXI7811R” (currently 1):

cables

(A) 16x cables type “SH68-68-EP” for connecting PXI-6133 to MAPS-Adapter:
(order number 184749-01 (1m) )
2x blauer 68-pin 0.050 D-Type — 68-pin 0.050 D-Type
http://sine.ni.com/nips/cds/view/p/lang/en/nid/11799
wire mapping (interner Aufbau)→
http://digital.natinst.com/public.nsf/$CXIV/ATTACH-AEEE-883STQ/$FILE/SH68-68-EP.png

(B) 4x cables “SHC68-68-RDIO” for connecting PXI-7811R to MAPS-Adapter:
(order number 191667-01 (1m) )
blauer 68-pin 0.050 silber VHDCI 68-pin male
This cable can be used for conneting to CNB68 or a chassis cRIO-9151 for field IOs. It has 40 DIO lines each twisted with an DGND line (40). Therefore some of the DGND have to chair the same pins at only 68 pole conectors on both ends. It' s better sweeted with use of PXI-7811R.
http://sine.ni.com/nips/cds/view/p/lang/en/nid/203198
wire mapping (interner Aufbau)→
http://digital.natinst.com/public.nsf/$CXIV/ATTACH-AEEE-883R8C/$FILE/SHC68-68-RDIO.png

(C) 4x cables “SHC68-C68-S” for connecting PXI-7811R to MAPS-Interface:
(order number 186380C-0R5)
silber VHDCI 68-pin male silber VHDCI 68-pin male
http://sine.ni.com/nips/cds/view/p/lang/en/nid/206792
wire mapping (interner Aufbau)→
http://digital.natinst.com/public.nsf/$CXIV/ATTACH-AEEE-883QMB/$FILE/SHC68-68.png

Not usable cables

Alternativ cable (currently used, 2 p.):
(B1) 4x cables “SH68-C68-S” for connecting PXI-7811R to MAPS-Adapter:
(order number 186381C-02 (2m))
blauer 68-pin 0.050 silber VHDCI 68-pin male?
http://sine.ni.com/nips/cds/view/p/lang/en/nid/206793
wire mapping (interner Aufbau)→
http://digital.ni.com/public.nsf/$CXIV/ATTACH-AEEE-8DBNQQ/$FILE/SH68-C68-S.PNG

This cable is to use together with counting device:
16x cable “SH68-68-D1” order number 183432 for counter boards:
blauer 68-pin 0.050 D-Type — 68-pin 0.050 D-Type
http://sine.ni.com/nips/cds/view/p/lang/en/nid/11801
wire mapping (interner Aufbau)→
http://digital.natinst.com/public.nsf/$CXIV/ATTACH-AEEE-883TMB/$FILE/SH6868-D1.png

projects/maps/niequippment.1324383830.txt.gz · Last modified: 2011/12/20 13:23 by carsten