Wiki
Wiki
This is an old revision of the document!
Maintained by Dimitri …
Warning!!! Firmware Version 2 is not compatible with Version 1. Before you will upgrade firmware to latest version please read carefully whole instruction.
Maintained by Piotr Miedzik P.Miedzik@gsi.de
Components:
Index | Jumper setting | Function |
---|---|---|
1 | Output | Pulse on GSI Event start |
2 | Output | Pulse on GSI Event stop |
3 | Output | Pulse on GSI Event start/stop |
4 | Output | Trigger for Scaler Module |
5 | Output | Trigger for Scaler Module gated with start/stop events |
6 | Input | Not used |
7 | Input | Not used |
8 | Input | Not used |
Not used
Index | Mode | Function |
---|---|---|
1 | High impedance | Not used |
2 | High impedance | Not used |
3 | High impedance | Not used |
4 | High impedance | Not used |
5 | High impedance | Not used |
6 | High impedance | Not used |
7 | High impedance | Not used |
8 | High impedance | Not used |
Header 2 is used to emulate VME Geographical Address. DTim board hasn't GA pins provided to VME Backplane. Default GA Address : 0x??????
Index | Mode | Function | Default jumper |
---|---|---|---|
1 | Input/PullUp | GA0 | Yes |
2 | Input/PullUp | GA1 | Yes |
3 | Input/PullUp | GA2 | Yes |
4 | Input/PullUp | GA3 | Yes |
5 | Input/PullUp | GA4 | Yes |
6 | Input/PullUp | GA CRC | Yes |
7 | High impedance | Not used | No |
8 | High impedance | Not used | No |
Header 3 is used for debugging purposes.
Index | Mode | Function |
---|---|---|
1 | Output | GSI events simulator output |
2 | High impedance | Not used |
3 | High impedance | Not used |
4 | High impedance | Not used |
5 | High impedance | Not used |
6 | High impedance | Not used |
7 | High impedance | Not used |
8 | High impedance | Not used |