Wiki
Sidebar
fair-bd:machines:sis100:technical_information:devices:halo
Table of Contents
★ Zurück zur Übersicht SIS100-Komponenten ★
Halo-Kollimatoren Technical Info Page
Basic Information
- 21 Halo Collimators are foreseen in SIS100
- Proton Halo Collimators
- Ion Halo Collimators
- Collimators for slow extraction
- There two motion types planed: presurized air driven (all positions in range typ, nomenclature ending “.p”) and stepper motor driven (ending “.s”)
- nomenclature (lt. email_l.bozyk_3.11.2016.pdf):
| # | Protonen Halo Kollimatoren | Erklärung | Auswerte-E-Raum für Strommessung | E-Raum mit Schrittmotorelektr.(M-Box) | |||
|---|---|---|---|---|---|---|---|
| Alt: 2016 | Neu: 2022 1S11DK0 | ||||||
| Antriebsart | Strommessung? | Streufolie: | |||||
| 1 | 1S11UHAPV.O.p | 1S11UP0VO.p | 1S11UP0IO (#1) | (vertikal oben), p | >S1b< | >S1g-240< K0923A.U30.240#RACK401 | |
| 2 | 1S11UHAPV.u.p | 1S11UP0VU.p | 1S11UP0IU (#2) | (vertikal unten), p | |||
| 3 | 1S11UHAPH.I.p | 1S11UP0HI.p | 1S11UP0II (#3) | (horizontal innen), p | |||
| 4 | 1S11UHAPH.A.p | 1S11UP0HA.p | 1S11UP0IA (#4) | (horizontal außen), p | |||
| 1S11DK1 | Kollimator-Absorberstufe 1: | ||||||
| 5 | 1S11DS1VO.s (Motor) | 1S11DS1IO (#5) | Ein Schrittmotor Leistungsteil 1S11DS1V.GN 1S11.NISCHE.A4 | ||||
| 6 | 1S11DS1VU.s (Motor) | 1S11DS1IU (#6) | |||||
| 7 | 1S11DS1HI.s (Motor) | 1S11DS1II (#7) | |||||
| 8 | 1S11DS1HA.s (Motor) | 1S11DS1IA (#8) | |||||
| 1S12DK3 | Kollimator-Absorberstufe 2: | ||||||
| 9 | 1S12DS2VO.s (Motor) | 1S12DS3VO.s | 1S12DS3IO (#9) | Ein Schrittmotor Leistungsteil 1S12DS2.GN 1S12.NISCHE.A6 | |||
| 10 | 1S12DS2VU.s (Motor) | 1S12DS3VU.s | 1S12DS3IU (#10) | ||||
| 11 | 1S12DS2HI.s (Motor) | 1S12DS3HI.s | 1S12DS3II (#11) | ||||
| 12 | 1S12DS2HA.s (Motor) | 1S12DS3HA.s | 1S12DS3IA (#12) | ||||
| Ionen Halo Kollimatoren | |||||||
| 13 | 1S11UHAIV.O.p | 1S11UI0V.p | 1S11UI0VI (#13) | Umladungsfolie vertikal (oben): Sektor 1, Zelle 1, Ende der Zelle | wie ob. | wie ob. | |
| 14 | 1S12DK1 1S12DS1VU.s | 1S12DS1IU (#14) | Absorberblock vertikal (unten) “normaler” Kollimator 1S12.NISCHE.A6 | ||||
| 1S52VU_E1) oder 1S52DK02) ? | Vakuumkammer Septum Endung E für Extraktion | ||||||
| 15 | 1S52UHAIH.I.p | 1S52UIEH.p | 1S52UIEII (#15) | Umladungsfolie horizontal (innen): Sektor 5, Zelle 2, Ende | |||
| Kollimatoren für langs. Extraktion | |||||||
| 1S52DK0 | |||||||
| 16 | 1S52DSKHI.s3) | 1S52DS0HI.s | 1S52DS0II (#16) | 2x Achse Schrittmotor an Ein Schrittmotor Leistungsteil 1S52.NISCHE.A102 | >S5b< | >S4b< | |
| 17 | 1S52DSKHA.s4) | 1S52DS0HA.s | 1S52DS0IA (#17) | ||||
| 1S52DK1 | |||||||
| 18 | 1S52DS1HI.s5) | 1S52DS1II (#18) | 2x Achse Schrittmotor | ||||
| 19 | 1S52DS1HA.s6) | 1S52DS1IA (#19) | |||||
| TP 4.2022→ MK 10.2020→ E-Septum→ | 1S53DK1 /1S53VKP /1S13VU_E | ||||||
| 20 | 1S53DS1VO.s | 1S53DSPVO.s | 1S53DSPIO (#20) | Ein Schrittmotor Leistungsteil 1S53.NISCHE.A104 | |||
| 21 | 1S53DS1VU.s | 1S53DSPVU.s | 1S53DSPIU (#21) | ||||
| # | Diagnoseelement… ↑………. | ………. ↑ in Va- kuumkammer | Erklärung | Auswerte-E-Raum für Strommessung | E-Raum mit Schrittmotorelektr.(M-Box) | ||
Updatezwischenschritt: Zwischenschritt » Resultat
- psp code: PSP-code of foreign group. Cables for completeness, to be passed to L. Bozyk
- Model:
Schematic Setup
schematic:
Sensor
Data Acquisition
- ADC:
- I/O:
Cabeling
Measuring cables - Strommessung (42)
Remarks = “Halo-Kollimatoren”
### 21x “Signal cable front end” 1: from BLM to IFC/patch panel in niche ✔
### 21x “IFC control and data cable”: from IFC to VDIO in E-Room (198) ✔
### common “IFC-9V-Power Net main line”: A common power supply bus line realize for BLMs and collimators
### common “IFC-9V-Power Net endpoint line” T-end point line to niche
Stepper motor drive cables (50)
Remarks = “Halo-Kollimatoren: Stepper”
Principal
A) Between Steppermotor and PDC (per axsis)
- 12pol. cable “Steppermotor Power Cable ”7) with UTG01214S connectors (Sourial) Stepper Motor Power Cable BEA#12 ( motorkabel_5-ph._vero_12_pol._st-bu_5001_.xls )
- 9pol. Sub-D “Poti cable Stepper”8) BEA#13 Poti cable Stepper ( potikabel_sub-d_9_pol.-vero_8_pol._st-bu_5002_.xls)
- optional “Encoder cable”
- 2pol Lemo Out Put Possition cable (End point switch)
B) Between PDC and M-Box:
- per PDC: 9pol Sub-D twisted pair Male (@PDC)-Female (@MBOX) 2x: “Serial1: Poti”9) Serial Poti 1 BEA#11 (cosylab_twisted-pair_sub-d_9_pol._bu-st_1018_.xls),
- per AXIS: 25pol Sub-D twisted pair Male-Male “AXIS-Line”10) Axis Line BEA#10 ( cosylab_twisted-pair_sub-d_25_pol._st-st_1014_.xls)
- per PDC: ( 9pol Sub-D twisted pair Male-Female 2x: “Serial2: Encoder” ) winkelcodierer_ssi_kabel_twisted-pair_sub-d_9_pol._bu-st_1020_.xls ,
Collection of all pinnings (for pass to FAIR S&B as a hole) ☛
Extraction of System manual:
Concrete realized
From Beam Instrumentation for L.Bozyk projected cables:
fair-bd/machines/sis100/technical_information/devices/halo.txt · Last modified: 2022/05/23 14:36 by carsten
