Two GigE cameras shall be read out on a max. of 200fps rate. Camera triggers need to be created by a timing receiver card. Camera data and operation is handled by a FESA class on a IPC, here the Janztec Sy-IPC-10000. I/O for LEDs etc will be handled by a separate I/O PCI card. Additional data derived from SIS 18 trafo, RF and magnet ramps are converted to frequencies and counted in a latching scaler.

DAQ description: here

• Janztec Sy-IPC-10000 IPC, Core i7
• 1TB harddrive, opt. Raid0 2x240GB SSD, opt.PCIe Raid Controller
• AddiData I/O (PCI)
• Dual Port GigE LAN Adapter (PCIe)
• Latching Scaler
• CTRI Timing Receiver plus GSI-CERN timing converter

• Setup and purchase of hardware
• Preparation of boot OS and timing
• I/O Fesa class (TG)
• Camera Fesa class (??)
• JAVA GUI