GSI - BEA Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== VME Digital Input/Output (V-DIO) System ======

The V-DIO is a modular VME based system and was mainly developed to control and readout measured signals and status from the Current to Frequency Converter ([[projects-internal:ifc3:ov-ifc3|IFC]]). The development was done by the swiss company {{http://www.magentasys.com|MagentaSys}}.

[[ds:hardware:vme:SVEC|SVEC FMC Carrier Board]]



As main board the V-DIO is using the {{http://www.ohwr.org/projects/svec|Simple VME FMC Carrier (SVEC)}} from the Open Hardware Repository (OHWR).

===== V-DIO Documents =====
  * {{ :projects:v-dio:gsi_vdio_project_user_manual_v3075.pdf}}: V-DIO User Manual and Register Declaration rev. 3075
  * {{:projects:vdio-test_report_20170208-2.pdf}} V-DIO Kabeltest-Report zur Ansteuerung der IFCs über lange Distanz.
  * {{:ed:cable-buffer-_report_20190225.pdf}} Report preemphasis cable buffer zur Signalverbesserung der RS485-Pulse bei langen Kabeln zw. VDIO und IFC.  

===== Documentation for Production and Tests =====
  * Important additional information for production and tests

PCB design was done with Altium Designer 14.2.3.
  * [[\\WinFileSvH\StrahlDiag$root\Common\V-DIO]]: Schematics, layouts (Altium and PDF files) and production files can be found here.
  * {{http://www.altium.com/products/downloads|Altium Designer Viewer}}: Free license application to view the Altium files. Registration on Altium site is necessary.
  * [[:ds:projects:vdio:el502|Programming of the EEPROM on the EL502 Mezzanine]]

GSI - BEA Wiki

User Tools

Site Tools

Page Tools