GSI - BEA Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== Master Board ======

===== Register map ======
^ Element     ^ Sub element ^ Base address       ^ MASK          ^
| WB RAM      || **0x00000000    ** | 0x0000FFFF |
| SDB         || **0x00300000    ** | 0x0000FFFF |
| FMC1        || **0x00310000    ** | 0x0000FFFF |
| | FMC1 DIO    | 0x00310000     | 0x000000FF |
| Periph      || **0x00370000    ** | 0x0000FFFF |
| | UART        | 0x00370000     | 0x000000FF |
| | LEDS        | 0x00370100     | 0x000000FF |
| | Buttons     | 0x00370200     | 0x000000FF |
| | TIC counter | 0x00370300     | 0x000000FF |
| | MLVDS       | 0x00370400     | 0x000000FF |
| | SDB         | 0x00370500     | 0x000000FF |

===== External trigger setup =====

  - Configure FMC1 DIO 5CH  
    - Set termination on channel 1 and 2 (0x00710010 = 0x03)
    - Set Alternate function (0x00710014 = 0x0C)
    - set direction on channel 3 and 4 (0x00710008 = 0x0C)
  - Configure MLVDS:
    - set direction on channel 1 and 2 (0x00710008 = 0x03)
    - Set Alternate function (0x00710014 = 0x03)

===== Soft Trigger trigger setup =====

GSI - BEA Wiki

User Tools

Site Tools

Page Tools