Differences

This shows you the differences between two versions of the page.

--- projects:maps:t-test7811 [2011/12/16 15:18]
carsten
+++ projects:maps:t-test7811 [2012/01/11 14:45] (current)
reeg
@@ Line 1: / Line 1: @@
 ====== T-Test7811 ======
-This three T-adapters are optional in use and only fit in in testing case. For use the NI-cable to the PXI7811-board carrying the signals to be examined has to be disconnected at the MAPS-adapter and must be feed to one arm of a T-adapter. Then an additional cable is introduced at the other arm of T-adapter and feed to the origional port at the MAPS-adapter to close the signal line again. Having done that an examination of signals can be executed at VG-pins on the back of the test-crate or with an VG-extender board at the fron side.\\
+These three T-adapters are optional and only fit into the testing crate. For use the NI-cable to the PXI7811-board carrying the signals to be examined has to be disconnected at the MAPS-adapter and must be feed to one arm of a T-adapter. Then an additional cable is introduced at the other arm of T-adapter and feed to the origional port at the MAPS-adapter to close the signal line again. Having done that an examination of signals can be executed at VG-pins on the back of the test-crate or with an VG-extender board at the fron side.\\
 ^ ^ ^
-|{{ :projects:maps:fehlermessadapter_maps.jpg?nolink&300 |T-Tests internal}}  |Signals to be measured and pins to measure on:\\  {{:projects:maps:belegung_vhdci_maps-bus_test.jpg?nolink&300|Signals to test}}  |
+|{{ :projects:maps:fehlermessadapter_maps.jpg?direct&300 |T-Tests internal}}  |Signals to be measured and pins to measure on:\\  {{:projects:maps:belegung_vhdci_maps-bus_test.jpg?direct&300|Signals to test}}  |
-Use of T-Testadapter:
+Use of T-Testadapter: There are two different sources with two different cables running to the NI PXI-7811R FPGA-board. In order to examine signal flow fit in T-Testadapter by disconnecting direct connection (upper cable) at the MAPS-adapter in built in the "T" and an additional cable (like lower combination):
-^  Gerät  ^  Kabel  ^  Gerät  ^
+^  Device  ^  Cable  ^  Device  ^
 |  **MAPS-Adapter**  |  SHC68-68-RDIO  |  **PXI-7811R**    \\  FBGA board  |
 |  connector (at cable)  \\  68-pin 0.050 D-Type | {{ :projects:maps:t-adapternutzung.jpg?nolink&400 |T-Adapternutzung}} |  connector 2/3 (at cable)  \\  VHDCI 68-pin male  |
 |  |  SH68-68-EP  <color white> ############## </color> SHC68-68-RDIO  |  |
-|  MAPS-Interface\\ (Fa. IMG )  |  SHC68-C68-S  |   **PXI-7811R**    \\  FBGA board  |
+|  **MAPS-Interface**  \\ (Fa. Hörmann-IMG )  |  SHC68-C68-S  |   **PXI-7811R**    \\  FBGA board  |
 |  connector (at cable)  \\  VHDCI 68-pin male  |  {{ :projects:maps:t-adapternutzung_zur_img-kiste.jpg?nolink&400 |}}  |   connector 0/1 (at cable)  \\  VHDCI 68-pin male   |
 | |  SHC68-68-RDIO   <color white> ############## </color>  SHC68-68-RDIO    | |

GSI - BEA Wiki

User Tools

Site Tools

Differences

Page Tools