This shows you the differences between two versions of the page.
Both sides previous revision Previous revision Next revision | Previous revision | ||
projects:maps:niequippment [2011/12/20 13:22] carsten [cables] |
projects:maps:niequippment [2020/02/02 12:11] (current) carsten |
||
---|---|---|---|
Line 1: | Line 1: | ||
- | ====== National Instruments Equippment used in this project: ====== | + | ☚ [[projects:maps: |
- | ===== NI-Crate and content | + | ====== National Instruments Equipment used in this project: ====== |
- | This system is designed to have two crates if extende to full 128 AC-Trafo capacity. | + | ===== NI-Crate and Components ===== |
+ | This system is designed to have two crates if extended to full 128 AC-Trafo capacity. | ||
- | 2 PXI-Crates (currently only 1): | ||
+ | 2 * PXI-Crates " | ||
+ | (order number 778645-01)\\ | ||
+ | [[http:// | ||
- | 2 PXI-Controller (currently only one): | ||
+ | 2 * PXI-Controllers " | ||
+ | [[http:// | ||
+ | Warum kein realtime controller PXI-8110RT ? | ||
- | 16 PXI-ADC board " | ||
+ | 16 * PXI-ADC board " | ||
+ | [[http:// | ||
- | 2 PXI-FGA board " | + | |
+ | 2 * PXI-FGA board " | ||
===== cables ===== | ===== cables ===== | ||
- | __**(A)** | + | __**(A)** |
- | (order number 184749-01 (1m))\\ | + | (order number 184749-01 (1m) )\\ |
2x <color blue> blauer 68-pin 0.050 D-Type --- 68-pin 0.050 D-Type</ | 2x <color blue> blauer 68-pin 0.050 D-Type --- 68-pin 0.050 D-Type</ | ||
[[http:// | [[http:// | ||
Line 26: | Line 33: | ||
[[http:// | [[http:// | ||
- | __**(B)** 4x cables " | + | __**(B)** 4x cables " |
+ | (order number 191667-01 (1m) )\\ | ||
<color blue> blauer 68-pin 0.050 </ | <color blue> blauer 68-pin 0.050 </ | ||
- | This cable can be used for conneting to CNB68 or a chassis cRIO-9151 for field IOs. It has 40 DIO lines each twisted with an DGND line (40). Therefore some of the DGND have to chair the same pins at only 68 pole conectors on both ends. It' s better sweeted with use of PXI-7811R.\\ | + | This cable can be used for conneting to SCB68 or a chassis cRIO-9151 for field IOs. It has 40 DIO lines each twisted with an DGND line (40). Therefore some of the DGND have to chair the same pins at only 68 pole conectors on both ends. It' s better sweeted with use of PXI-7811R.\\ |
[[http:// | [[http:// | ||
wire mapping (interner Aufbau)-> | wire mapping (interner Aufbau)-> | ||
[[http:// | [[http:// | ||
- | __**(C)** 4x cables " | + | __**(C)** 4x cables " |
(order number 186380C-0R5)\\ | (order number 186380C-0R5)\\ | ||
<color grey> silber VHDCI 68-pin male </ | <color grey> silber VHDCI 68-pin male </ | ||
Line 44: | Line 52: | ||
- | ===== Not usable cables | + | ===== Alternative cable ====== |
- | + | (currently used, 2 p.):\\ | |
- | Alternativ cable (currently used, 2 p.) | + | |
__**(B1)** 4x cables " | __**(B1)** 4x cables " | ||
(order number 186381C-02 (2m))\\ | (order number 186381C-02 (2m))\\ | ||
- | <color blue> blauer 68-pin 0.050 </ | + | <color blue> blauer 68-pin 0.050 </ |
+ | This cable is designed origionally for use with in and out goimg analog signals. Used with PXI-7811R there will be DIO lines twisted together pair wise that should not be handle this way.\\ | ||
[[http:// | [[http:// | ||
wire mapping (interner Aufbau)-> | wire mapping (interner Aufbau)-> | ||
[[http:// | [[http:// | ||
+ | ===== cable that should not be used ===== | ||
This cable is to use together with counting device: | This cable is to use together with counting device: | ||
__16x cable " | __16x cable " | ||
Line 61: | Line 70: | ||
[[http:// | [[http:// | ||
+ | ---- | ||
+ | ☚ [[projects: |