GSI - BEA Wiki

User Tools

Site Tools

Trace: • niequippment
projects:maps:niequippment

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision 		Previous revision
projects:maps:niequippment [2011/12/20 13:11]
carsten 		projects:maps:niequippment [2020/02/02 12:11] (current)
carsten
Line 1: Line 1:
-====== National Instruments Equippment used in this project: ======+☚ [[projects:maps:overview|Back]] ★
  
-===== NI-Crate and content =====+====== National Instruments Equipment used in this project: ======
  
-This system is designed to have two crates if extende to full 128 AC-Trafo capacity.+===== NI-Crate and Components =====
  
 +This system is designed to have two crates if extended to full 128 AC-Trafo capacity.
  
-2 PXI-Crates (currently only 1): 
  
 +2  * PXI-Crates "PXI-1045" (currently only 1):
 +(order number 778645-01)\\ 
 +[[http://www.ni.com/pdf/products/us/pxi1045.pdf]]
  
-2 PXI-Controller (currently only one): 
  
 +2 * PXI-Controllers "PXI-8110" (currently only one):\\ 
 +[[http://sine.ni.com/nips/cds/view/p/lang/en/nid/206809]]
 +Warum kein realtime controller PXI-8110RT ?
  
-16 PXI-ADC board "PXI6133" (currently 9): 
  
 +16 * PXI-ADC board "PXI6133" (currently 9):\\
 +[[http://sine.ni.com/nips/cds/view/p/lang/en/nid/201937]]
  
-2 PXI-FGA board "PXI7811R" (currently 1):+ 
 +2 * PXI-FGA board "PXI7811R" (currently 1):
  
 ===== cables ===== ===== cables =====
  
-__**(A)** 16x cables type "SH68-68-EP" for connecting **PXI-6133 to MAPS-Adapter:**__\\ +__**(A)** 16 * cables type "SH68-68-EP" for connecting **PXI-6133 to MAPS-Adapter:**__\\ 
-(order number 184749-01 (1m))\\ +(order number 184749-01 (1m) )\\ 
 2x <color blue> blauer 68-pin 0.050 D-Type --- 68-pin 0.050 D-Type</color> <color green>**√**</color>\\    2x <color blue> blauer 68-pin 0.050 D-Type --- 68-pin 0.050 D-Type</color> <color green>**√**</color>\\   
 [[http://sine.ni.com/nips/cds/view/p/lang/en/nid/11799]]\\  [[http://sine.ni.com/nips/cds/view/p/lang/en/nid/11799]]\\ 
Line 26: Line 33:
 [[http://digital.natinst.com/public.nsf/$CXIV/ATTACH-AEEE-883STQ/$FILE/SH68-68-EP.png]] [[http://digital.natinst.com/public.nsf/$CXIV/ATTACH-AEEE-883STQ/$FILE/SH68-68-EP.png]]
  
-__**(B)** 4x cables "SHC68-68-RDIO" order number 191667-01 (1m) for connecting **PXI-7811R  to MAPS-Adapter:**__\\+__**(B)** 4x cables "SHC68-68-RDIO" for connecting **PXI-7811R (Con2/Con3)  to MAPS-Adapter:**__\\ 
 +(order number 191667-01 (1m) )\\ 
 <color blue> blauer 68-pin 0.050 </color>---<color grey> silber VHDCI 68-pin male</color><color green>**√**</color> \\  <color blue> blauer 68-pin 0.050 </color>---<color grey> silber VHDCI 68-pin male</color><color green>**√**</color> \\ 
 +This cable can be used for conneting to SCB68 or a chassis cRIO-9151 for field IOs. It has 40 DIO lines each twisted with an DGND line (40). Therefore some of the DGND have to chair the same pins at only 68 pole conectors on both ends. It' s better sweeted with use of PXI-7811R.\\ 
 [[http://sine.ni.com/nips/cds/view/p/lang/en/nid/203198]]\\  [[http://sine.ni.com/nips/cds/view/p/lang/en/nid/203198]]\\ 
 wire mapping (interner Aufbau)->\\  wire mapping (interner Aufbau)->\\ 
 [[http://digital.natinst.com/public.nsf/$CXIV/ATTACH-AEEE-883R8C/$FILE/SHC68-68-RDIO.png]] [[http://digital.natinst.com/public.nsf/$CXIV/ATTACH-AEEE-883R8C/$FILE/SHC68-68-RDIO.png]]
  
-__**(C)** 4x cables "SHC68-C68-S" for connecting **PXI-7811R to MAPS-Interface:**__\\+__**(C)** 4x cables "SHC68-C68-S" for connecting **PXI-7811R (Con0/Con1) to MAPS-Interface:**__\\
 (order number 186380C-0R5)\\  (order number 186380C-0R5)\\ 
 <color grey> silber VHDCI 68-pin male </color> --- <color grey> silber VHDCI 68-pin male </color><color green>**√**</color>\\   <color grey> silber VHDCI 68-pin male </color> --- <color grey> silber VHDCI 68-pin male </color><color green>**√**</color>\\  
Line 43: Line 52:
  
  
-===== Not usable cables ====== +===== Alternative cable ====== 
- +(currently used, 2 p.):\\ 
-Alternativ cable (currently used, 2 p.)+
 __**(B1)** 4x cables "SH68-C68-S" for connecting **PXI-7811R  to MAPS-Adapter:**__\\ __**(B1)** 4x cables "SH68-C68-S" for connecting **PXI-7811R  to MAPS-Adapter:**__\\
 (order number 186381C-02 (2m))\\  (order number 186381C-02 (2m))\\ 
-<color blue> blauer 68-pin 0.050 </color>---<color grey> silber VHDCI 68-pin male</color><color red>**?**</color>\\ +<color blue> blauer 68-pin 0.050 </color>---<color grey> silber VHDCI 68-pin male</color><color green>**√**</color>\\  
 +This cable is designed origionally for use with in and out goimg analog signals. Used with PXI-7811R there will be DIO lines twisted together pair wise that should not be handle this way.\\ 
 [[http://sine.ni.com/nips/cds/view/p/lang/en/nid/206793]]\\  [[http://sine.ni.com/nips/cds/view/p/lang/en/nid/206793]]\\ 
 wire mapping (interner Aufbau)->\\  wire mapping (interner Aufbau)->\\ 
 [[http://digital.ni.com/public.nsf/$CXIV/ATTACH-AEEE-8DBNQQ/$FILE/SH68-C68-S.PNG]] [[http://digital.ni.com/public.nsf/$CXIV/ATTACH-AEEE-8DBNQQ/$FILE/SH68-C68-S.PNG]]
  
 +===== cable that should not be used =====
 This cable is to use together with counting device:\\  This cable is to use together with counting device:\\ 
 __16x cable "SH68-68-D1" order number 183432 for counter boards:__\\ __16x cable "SH68-68-D1" order number 183432 for counter boards:__\\
Line 60: Line 70:
 [[http://digital.natinst.com/public.nsf/$CXIV/ATTACH-AEEE-883TMB/$FILE/SH6868-D1.png]] [[http://digital.natinst.com/public.nsf/$CXIV/ATTACH-AEEE-883TMB/$FILE/SH6868-D1.png]]
  
 +---- 
 +☚ [[projects:maps:overview|Back]] ★
projects/maps/niequippment.1324383110.txt.gz · Last modified: 2011/12/20 13:11 by carsten

Page Tools

Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki