GSI - BEA Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== Board AMP68VG96 ======

{{ :projects:maps:mapsadapter:rahmenpulsmodul:amp68vg96_v2.jpg?direct&800 |}}

Note the counter clock wise numbering for the connectors at PXI-7811R FPGA board starting at the upper left.
Following shows on board connections between VG-connector and PXI-connector in tabellaric form.  Remeber: there are four connectors leaving for two different PXI-Crates (P1 or P2) and each two different connector use for "rahmenpulse (C2 or C3). This generates the four coloums in table that are to the Pin numbers (i.e P2C3 is second crate connector 3). 

{{ :projects:maps:mapsadapter:rahmenpulsmodul:belegung_amp68vg96.jpg?direct&600 |Belegung AMP68VG96 mit Rahmenpulsen}}

For those willing to do eye training here also in schematic form:

{{:projects:maps:mapsadapter:rahmenpulsmodul:amp68vg96_skematic.pdf|circuit schematics AMP68VG96}}

GSI - BEA Wiki

User Tools

Site Tools

Page Tools