GSI - BEA Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
===== DTim Version 1 =====

Maintained by Dmitry Lyakin <d.liakin@gsi.de> ...

FIXME 


===== DTim Version 2 =====
**Warning!!! Firmware Version 2 is not compatible with Version 1.
Before you will upgrade firmware to latest version please read carefully whole instruction.**

Maintained by Piotr Miedzik <P.Miedzik@gsi.de>

Components:
  * CES RIO3 8064 (LynxOS 3.1.0a)
  * DTim
  * 1-4x Scaler module
 
  * DTim Hardware:
    * Board version: FIXME
    * FPGA firmware: V2.0@2014-10-01
    * DSP firmware: not used
    * Front Panel firmware: FIXME
  * Software:
    * RIO Server: FIXME
    * ABLASS Provider: FIXME
    * ABLASS GUI: FIXME
    * ABLASS ...



==== Lemo Input/Output ====
FIXME Add front panel picture

^ Index ^ Jumper setting ^ Function ^
^ 1 | Output | Pulse on GSI Event start |
^ 2 | Output | Pulse on GSI Event stop |
^ 3 | Output | Pulse on GSI Event start/stop |
^ 4 | Output | Trigger for Scaler Module |
^ 5 | Output | Trigger for Scaler Module gated with start/stop events |
^ 6 | Output | Gate between start cycle and end (will be added in Version 2.1) |
^ 7 | Input | Not used |
^ 8 | Input | Not used |

==== Header 1 ====

Not used

^ Index ^ Mode ^ Function ^
^ 1 | High impedance | Not used |
^ 2 | High impedance | Not used |
^ 3 | High impedance | Not used |
^ 4 | High impedance | Not used |
^ 5 | High impedance | Not used |
^ 6 | High impedance | Not used |
^ 7 | High impedance | Not used |
^ 8 | High impedance | Not used |

==== Header 2 ====

Header 2 is used to emulate VME Geographical Address.
DTim board hasn't GA pins provided to VME Backplane.
Default GA Address : //0x??????//

^ Index ^ Mode ^ Function ^ Default jumper ^
^ 1 | Input/PullUp | GA0 | Yes |
^ 2 | Input/PullUp | GA1 | Yes |
^ 3 | Input/PullUp | GA2 | Yes |
^ 4 | Input/PullUp | GA3 | Yes |
^ 5 | Input/PullUp | GA4 | Yes |
^ 6 | Input/PullUp | GA CRC | Yes |
^ 7 | High impedance | Not used | No |
^ 8 | High impedance | Not used | No |

==== Header 3 ====
Header 3 is used for debugging purposes.

^ Index ^ Mode ^ Function ^
^ 1 | Output | GSI events simulator output |
^ 2 | High impedance | Not used |
^ 3 | High impedance | Not used |
^ 4 | High impedance | Not used |
^ 5 | High impedance | Not used |
^ 6 | High impedance | Not used |
^ 7 | High impedance | Not used |
^ 8 | High impedance | Not used |

==== FPGA Firmware V2 ====
Project repository: http://gitorious.gsi.de/ablass/dtim_vme_fpga\\
GIT (Read Only): **%%git://gitorious.gsi.de/ablass/dtim_vme_fpga.git%%**\\
GIT (Read/Write): **%%git@gitorious.gsi.de:ablass/dtim_vme_fpga.git%%**\\

Wishbone Slaves:
  * [[projects:lobi-ip_cores&#gsi_event_logger|GSI Event Logger]] - offset: 0x00000000
  * [[projects:lobi-ip_cores&#gsi_simulator|GSI Simulator]] - offset: 0x000?????

==== Diagnostic Tools ====
**WARNING!!! Diagnostic tools are available only for Linux Operating system**

=== dtim_config ===
=== dtim_readout ===
=== dtim_sim ===
=== dtim_raw ===

===== ABLASS Server =====

=== Configuration ===
=== Startup ===
ablax_ablass process will demonize itself (http://www.netzmafia.de/skripten/unix/linux-daemon-howto.html)
There are some important options that can be passed to 
  * **-d level** debug mask. Default 0
  * **-f** do not demonize, stay in background.
  * **-p pid_file** store pid into pid_file file. Default: ./ablax_ablass.pid
  * **-c config_file** path co configuration file. Default: ./ablax_ablass.cfg
  * **-l log_file** path to log file. Default: **./ablax_ablass.log**. **-** means to log only to stdout, implies **-f**

=== Debug mask ===
0 - no debug/log features\\
1 - debug general\\
2 - debug cycle''
3 - ... \\
GSI - BEA Wiki

User Tools

Site Tools

Page Tools
