Table of Contents
Data Acquisition for the Ionisation Profile Monitor at SIS18
Two GigE cameras shall be read out on a max. of 200fps rate. Camera triggers need to be created by a timing receiver card. Camera data and operation is handled by a FESA class on a IPC, here the Janztec Sy-IPC-10000. I/O for LEDs etc will be handled by a separate I/O PCI card. Additional data derived from SIS 18 trafo, RF and magnet ramps are converted to frequencies and counted in a latching scaler.
DAQ description: here
Hardware Setup
- Janztec Sy-IPC-10000 IPC, Core i7
- 1TB harddrive, opt. Raid0 2x240GB SSD, opt.PCIe Raid Controller
- AddiData I/O (PCI)
- Dual Port GigE LAN Adapter (PCIe)
- Latching Scaler
- CTRI Timing Receiver plus GSI-CERN timing converter
Next Steps
- Setup and purchase of hardware
- Preparation of boot OS and timing
- I/O Fesa class (TG)
- Camera Fesa class (??)
- JAVA GUI