Pneumatic Drives:

The PLC System for the pneumatic actuators @ CRYRING is a decentralized Profinet IO-System consisting of one IO-Controller, located at the LOBI Cryring container, and two remote IO-Stations, located in the CRYRING. Its purpose is to control and determine the position of each drive. Communication to the Interlock-System is realized using the I-Device functionality.

Webinterface:SDAPLC003

CPU:

• Power supply PS 307 24V/5A 6ES7 307-1EA01-0AA0
• CPU 2 CPU 315F-2 PN/DP 6ES7 315-2FJ14-0AB0
• Interface module CP 343-1 Advanced 6GK7 343-1GX31-0XE0
• Digital output DO32 x 24VDC / 0.5A 6ES7 322-1BL00-0AA0

Location: CRYRING hut

IO-Device (2):

Pneumatic Drive IO Device 01:

• IO interface module 0 IM 153-4 PN for ET 200M 6ES7 153-4AA01-0XB0
• Digital output DO8 x 230VAC/2A 6ES7 322-1HF01-0AA0
• Digital input DI16 x 24VDC, sourcing 6ES7 321-1BH50-0AA0 (2)

Drives:

• GHTYDF3_P MSL
• YR02DC1_P MSL
• YR11DC3_P FAIR
• YR11DF3_P FAIR

Location: CRYRING north wall

Pneumatic Drive IO Device 02:

• IO interface module 0 IM 153-4 PN for ET 200M 6ES7 153-4AA01-0XB0
• Digital output DO8 x 230VAC/2A 6ES7 322-1HF01-0AA0
• Digital input DI16 x 24VDC, sourcing 6ES7 321-1BH50-0AA0 (2)

Drives:

• YR07DF2_P FAIR
• YR07DC2_P FAIR
• YRE1DC1_P MSL (Extraktion, not mounted yet)
• YRE1DF1_P MSL (Extraktion, not mounted yet)

Location: CRYRING west section YR08?

Pneumatic Drive Block connection “BL” :

Pneumatic control cable: (connection to PLC, double cable)
PA-Steuerkabel

last edited:

• March 15th 2023 - Pneumatic Drive Block connection added