====== Components at the beam line ======

Besides the detector mechanics and scintillating screen, a camera with lens system and connector box is installed at the beam line. Long cables (copper) lead to the DAQ and PLC systems.

===== Components in the tunnel =====

  *  The camera with lens system and optical shielding
  *  LED for calibration
  *  Mechanical part including pneumatic drive, viewing ports, etc. 
  *  Adapter box

If unavoidable, the PLC system for control of the lens system and LED can be mounted in a 19” rack system in the tunnel in radiation protected/reduced areas.

===== Components in the electronics room =====

All components of the SCR DAQ system as well as the required PLC infrastructure should be installed in electronics rooms. They are mounted in 19” rack systems. 

===== Cabling =====

==== GbE Version ====

**Long cables**:\\
1x halogen free UNITRONIC S/FTP CAT7 LSZH 4x2xAWG23 network cable for camera data Signals\\
1x halogen free DATAFLAMM-C 5x0.14mm2 between PLC and Adapter box\\
1x halogen free DATAFLAMM-C PAAR 5x2x0.14mm2 between CPS8 and Adapter box\\
**Short cables**:\\
1x halogen free DATAFLAMM-C 5x0.14mm2 between Adapter box and lens\\
1x halogen free DATAFLAMM-C 2x0.14mm2 between Adapter box and LED\\

==== Radiation-hardened Version ====

**Long cables**:\\
1x remote head cable, LS0H for camera data Signals\\
1x halogen free DATAFLAMM-C 5x0.14mm2 between PLC and Adapter box\\
**Short cables**:\\
1x halogen free DATAFLAMM-C 5x0.14mm2 between Adapter box and lens\\
1x halogen free DATAFLAMM-C 2x0.14mm2 between Adapter box and LED\\