GSI - BEA Wiki

User Tools

Site Tools

Trace:
ds:software:hv

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision 		Previous revision
ds:software:hv [2015/04/27 14:51]
tmilosic 		ds:software:hv [2015/08/31 16:36] (current)
rhaseitl
Line 1: Line 1:
 +[[ds:software|Back to software overview]]
 +
 ====== High Voltage Control ====== ====== High Voltage Control ======
  
Line 12: Line 14:
 | Is the crate (and implicitely all registered channels) a real device? |  -  |  //implicit via crate config//  | isRealDevice \\ (bool, default: true) | | | Is the crate (and implicitely all registered channels) a real device? |  -  |  //implicit via crate config//  | isRealDevice \\ (bool, default: true) | |
 | Address of the crate                                     | crateIP (e.g. 140.181.12.34) |  -  | hostnameFQDN \\ (e.g. sdhv003.acc.gsi.de)  | - | | Address of the crate                                     | crateIP (e.g. 140.181.12.34) |  -  | hostnameFQDN \\ (e.g. sdhv003.acc.gsi.de)  | - |
-| Number/Index of the HV channel                                 | channel (e.g. 506)  |   | chNum (first channel == 0) | - |+| Number/Index of the HV channel                           |  -  | inCrate \\ (exact(!) FESA crate name) |  -  | - | 
 +| Board slot index on which channel resides                |  -  | inSlot  |  -  | - | 
 +| Number/Index of the HV channel                           |  -  | chNum (first channel == 0) |  -  | - |
 | Does the channel support only one ramp rate              | singleRampRate | singleRampRate \\ (bool, default false) |  -  | - | | Does the channel support only one ramp rate              | singleRampRate | singleRampRate \\ (bool, default false) |  -  | - |
 | minimum ramp rate (always >= 0)                          | minRamp        | minRamp  |  -  | - | | minimum ramp rate (always >= 0)                          | minRamp        | minRamp  |  -  | - |
Line 18: Line 22:
 | resolution of the voltage measurement                    | resVoltage     | resVoltage \\ (default 0.5 V) |  -  | - | | resolution of the voltage measurement                    | resVoltage     | resVoltage \\ (default 0.5 V) |  -  | - |
 | resolution of the current measurement                    | resCurrent     | resCurrent |  -  | - | | resolution of the current measurement                    | resCurrent     | resCurrent |  -  | - |
 +| maximum current supported by board                       | //queried//    | currentS_max_manual \\ CAEN does not allow to query that property |  -  |
 +| polarity of channel                                      | //queired//    | polarity \\ CAEN does not allow to safely query that property |  -  |
 | mockup or real device (true means it is a mockup device) | isMockupDevice | //implicit//  | //see isRealDevice//  | - | | mockup or real device (true means it is a mockup device) | isMockupDevice | //implicit//  | //see isRealDevice//  | - |
 ^ Setting Property   ^^^^ ^ Setting Property   ^^^^
-| Demanded voltage (Sollspannung)  | voltageS (+_min, _max) | voltageS (+_min,_max)  |  -  | voltageS |+| Demanded voltage (Sollspannung)                          | voltageS (+_min, _max) | voltageS (+_min,_max)  |  -  | voltageS |
 ^ ExpertSetting Property   ^^^^ ^ ExpertSetting Property   ^^^^
-| current limit    | currentS (+_max)            | currentS (+_max) |  -  | currentS (+_min,_max) | +| current limit                                            | currentS (+_max)            | currentS (+_max) |  -  | currentS (+_min,_max) | 
-| ramp up rate    | rampUpRate (+_min, _max)    | rampUpRate (+_min,_max) |  -  | rampUpRate (+_min, _max) | +| ramp up rate                                             | rampUpRate (+_min, _max)    | rampUpRate (+_min,_max) |  -  | rampUpRate (+_min, _max) | 
-| ramp down rate  | rampDownRate (+_min, _max)  | rampDownRate (+_min,_max) |  -  | rampDownRate (+_min, _max) | +| ramp down rate                                           | rampDownRate (+_min, _max)  | rampDownRate (+_min,_max) |  -  | rampDownRate (+_min, _max) | 
-| trip time        | tripTime ExpertSettings     | tripTime  |  -  | tripTime  |+| trip time                                                | tripTime ExpertSettings     | tripTime  |  -  | tripTime  |
 ^ **Acquisition**   ^^^^ ^ **Acquisition**   ^^^^
-| actual voltage (Istspannung) | voltageI              |     |     | voltageI  | +| actual voltage (Istspannung)                             | voltageI       | voltageI   |  -  | voltageI  | 
-| actual current (Iststrom)    | currentI                  |     |     | currentI | +| actual current (Iststrom)                                | currentI       | currentI   |  -  | currentI | 
-| channel polarity   | polarity (char array: + or -) not used in the GUI, just for info purposes   |     |     | voltageI sollte das widerspiegeln  | +| channel polarity                                         | polarity (char array: + or -) not used in the GUI, just for info purposes   | polarity {'+','-'} (config value, can't be queried!)    |  -  | voltageI sollte das widerspiegeln  | 
-| actual ramp up rate   | rampUpRateI   |     |   |   | +| actual ramp up rate                                      | rampUpRateI   | rampUpRateI  |  -  |   | 
-| actual ramp down rate | rampDownRateI |     |   |   | +| actual ramp down rate                                    | rampDownRateI | rampDownRateI |  -  |   | 
-| demanded voltage on the device (Sollpannung die auf dem Gerät gesetzt ist)  | setVoltageHardwareI |   |   | Es gibt bei CSCO immer wieder Überlegungen, ob der Sollwert nochmal mitgeschickt werden soll. Ich persönlich finde es überflüssig, ausser vielleicht, es ist der aus dem Gerät ausgelesene Sollwert. Aber da gibt es viele Meinungen. | +| demanded voltage on the device (Sollpannung die auf dem Gerät gesetzt ist)  | setVoltageHardwareI | setVoltageHardwareI  |  -  | Es gibt bei CSCO immer wieder Überlegungen, ob der Sollwert nochmal mitgeschickt werden soll. Ich persönlich finde es überflüssig, ausser vielleicht, es ist der aus dem Gerät ausgelesene Sollwert. Aber da gibt es viele Meinungen. | 
-| An/Aus des Kanals    | //not implemented//              |     |    | Ich glaube das sollte das powerState field in der Status property sein  rh: ist es| +| An/Aus des Kanals                                        | //not implemented//         |     |    | Ich glaube das sollte das powerState field in der Status property sein  rh: ist es| 
-| actual trip time     | tripTimeI     |     |   |   | +| actual trip time                                         | tripTimeI     | tripTimeI   |  -  |   | 
-| actual current limit | currentLimitI |     |   |   |+| actual current limit                                     | currentLimitI | setCurrentLimitHardwareI   |  -  |   |
 ^ **Status**   ^^^^ ^ **Status**   ^^^^
 | Detailed status  | siehe unten |  |  |  | | Detailed status  | siehe unten |  |  |  |
 ^ Info (partly filled with the values from the configuration fields)  ^^^^ ^ Info (partly filled with the values from the configuration fields)  ^^^^
-| only one ramp rate?  | singleRampRate (bool) |  |  |  | +| only one ramp rate?  | singleRampRate (bool) | singleRampRate (bool)  |  -  |  | 
-| minimum channel voltage   | minVoltage (queried from hardware) |  |  |  | +| minimum channel voltage   | minVoltage (queried from hardware) | minVoltage (queried from hardware)   |  -  |  | 
-| maximum channel voltage  | maxVoltage (queried from hardware) |  |  |  | +| maximum channel voltage  | maxVoltage (queried from hardware) | maxVoltage (queried from hardware) |  -  |  | 
-| maximum channel current  | maxCurrent (queried from hardware) |  |  |  | +| maximum channel current  | maxCurrent (queried from hardware) | maxCurrent (manual config field via currentS_max_manual) |  -  |  | 
-| minimum ramp rate  | minRamp |  |  |  | +| minimum ramp rate  | minRamp | minRamp |  -  |  | 
-| maximum ramp rate  | maxRamp |  |  |  | +| maximum ramp rate  | maxRamp | maxRamp |  -  |  | 
-| resolution of the voltage measurement  | resVoltage |  |  |  | +| resolution of the voltage measurement  | resVoltage | resVoltage |  -  |  | 
-| resolution of the current measurement  | resVoltage |  |  |  | +| resolution of the current measurement  | resVoltage | resCurrent |  -  |  | 
-| polarity   | polarity (char array: + or -)     |     |    |    | +| polarity   | polarity (char array: + or -)     | polarity (char array: + or -)    |   -   |    | 
-| Number of the slot the card with the channel sits in | slotNumber (int32_t) |  |  |  | +| Number of the slot the card with the channel sits in | slotNumber (int32_t) | slotNumber (int32_t) |  -  |  | 
-| Number of the channel on a card | channelNumber (int32_t) |  |  |  |+| Number of the channel on a card | channelNumber (int32_t) | channelNumber (int32_t)  |  -  |  |
  
  
  
  
-==== Detailed Status Bits ====+==== MPOD::Detailed Status Bits ====
 In der MPOD Klasse werden momentan diese Bits ausgelesen und gesetzt. Teilweise verhalten sich die Bits nicht wie erwartet, z.B. "outputOn" zeigt nur true, wenn der Kanal eingeschaltet ist UND eine Spannung anliegt. Wenn der Kanal eingeschaltet ist aber auf 0V steht, ist das Bit false. In der MPOD Klasse werden momentan diese Bits ausgelesen und gesetzt. Teilweise verhalten sich die Bits nicht wie erwartet, z.B. "outputOn" zeigt nur true, wenn der Kanal eingeschaltet ist UND eine Spannung anliegt. Wenn der Kanal eingeschaltet ist aber auf 0V steht, ist das Bit false.
 Auf manchen Karten ist das outputAdjusting Bit immer an. Auf manchen Karten ist das outputAdjusting Bit immer an.
Line 81: Line 87:
 ACHTUNG: Bei den Failure Bits bedenken, dass gilt: ERROR_ON_FALSE und WARNING_ON_FALSE, d.h. bit gesetzt bedeutet alles OK! ACHTUNG: Bei den Failure Bits bedenken, dass gilt: ERROR_ON_FALSE und WARNING_ON_FALSE, d.h. bit gesetzt bedeutet alles OK!
  
 +==== CAEN::Kanal::Detailed Status Bits ====
 +
 +  * outputOn
 +  * outputRampUp
 +  * outputRampDown
 +  * outputOverCurrent
 +  * outputOverVoltage
 +  * outputUnderVoltage
 +  * outputExternalTrip
 +  * outputMaxVoltage
 +  * outputExternalDisable
 +  * outputInternalDisable
 +  * outputCalibrationError
 +  * outputUnplugged
 +  * outputOVProtection
 +  * outputPowerFail
 +  * outputTemperatureError
 +  * outputChannelOutOfRange
 +  * outputSlotOutOfRange
 +  * outputNoSuchBoard
 +  * outputAmbiguousConfig
 +  * outputInvalidCrate
 +  * boardPowerFail
 +  * boardFirmwareChecksumError
 +  * boardHvCalibrationError
 +  * boardTempCalibrationError
 +  * boardUndertempError
 +  * boardOvertempError
 +
 +==== CAEN::Crate::Detailed Status Bits ====
 +
 +TODO
  
 +[[ds:software|Back to software overview]]
ds/software/hv.1430139112.txt.gz · Last modified: 2015/04/27 14:51 by tmilosic

Page Tools

Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki