User Tools

Site Tools


ds:software:hv

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
ds:software:hv [2015/03/02 09:14]
rhaseitl [Common Fesa Interface]
ds:software:hv [2015/08/31 16:36] (current)
rhaseitl
Line 1: Line 1:
 +[[ds:software|Back to software overview]]
 +
 ====== High Voltage Control ====== ====== High Voltage Control ======
  
Line 4: Line 6:
  
  
-^               ^ MPOD Fesa class (data type double unless noted)                           ^ CAEN Fesa class ^ GUI ^+^               ^ MPOD Fesa class (data type double unless noted)                           ^ CAEN Fesa class (Channel) ^ CAEN Fesa class (Crate) ^ GUI ^
 ^ Configuration data fields (for info only)  ^^^^ ^ Configuration data fields (for info only)  ^^^^
-IP of the crate           | crateIP (e.g. 140.181.12.34) |   | - | +Model type {SY1527, SY2527, SY4527, SY5527                -  |  -  | model \\ (enum SYX527_MODEL)  | | 
-number of the HV channel  | channel (e.g. 506            | - | +| Login                                                    |  -  |  -  | login  | | 
-| Does the channel support only one ramp rate  | singleRampRate |   | - | +| Password                                                  -  |  -  | password \\ (plain text)  | | 
-| minimum ramp rate                      | minRamp        |   | - | +| Acquisition mode {POLLING_MODE, EVENT_MODE}. Event mode falls back to polling mode on old SY1527/2527 crates |  -  |  -  | acqMode (enum SET_ACQ_MODE) | | 
-| maximum ramp rate                      | maxRamp        |   | - | +| Is the crate (and implicitely all registered channels) a real device? |  -  |  //implicit via crate config//  | isRealDevice \\ (bool, default: true) | | 
-| resolution of the voltage measurement  | resVoltage       | - | +| Address of the crate                                     | crateIP (e.g. 140.181.12.34) |   | hostnameFQDN \\ (e.g. sdhv003.acc.gsi.de)  | - | 
-| resolution of the current measurement  | resCurrent       | - | +Number/Index of the HV channel                           |  -  | inCrate \\ (exact(!) FESA crate name) |  -  | - | 
-| mockup or real device                  | isMockupDevice |   | - |+Board slot index on which channel resides                |  -  | inSlot  |  -  | - | 
 +| Number/Index of the HV channel                            -  | chNum (first channel == 0) |  -  | - | 
 +| Does the channel support only one ramp rate              | singleRampRate | singleRampRate \\ (bool, default false) |  -  | - | 
 +| minimum ramp rate (always >= 0)                          | minRamp        | minRamp  |  -  | - | 
 +| maximum ramp rate (always >= 0)                          | maxRamp        | maxRamp  |  -  | - | 
 +| resolution of the voltage measurement                    | resVoltage     resVoltage \\ (default 0.5 V) |  -  | - | 
 +| resolution of the current measurement                    | resCurrent     resCurrent |  -  | - 
 +| maximum current supported by board                       | //queried//    | currentS_max_manual \\ CAEN does not allow to query that property |  -  | 
 +| polarity of channel                                      | //queired//    | polarity \\ CAEN does not allow to safely query that property |  -  
 +| mockup or real device (true means it is a mockup device) | isMockupDevice | //implicit//  | //see isRealDevice//  | - |
 ^ Setting Property   ^^^^ ^ Setting Property   ^^^^
-| Demanded voltage (Sollspannung)  | voltageS (+_min, _max) |   | voltageS |+| Demanded voltage (Sollspannung)                          | voltageS (+_min, _max) | voltageS (+_min,_max)  |  -  | voltageS |
 ^ ExpertSetting Property   ^^^^ ^ ExpertSetting Property   ^^^^
-| current limit    | currentS (+_max)            |  | currentS (+_min,_max) | +| current limit                                            | currentS (+_max)            | currentS (+_max)   | currentS (+_min,_max) | 
-| ramp up rate    | rampUpRate (+_min, _max)    |  | rampUpRate (+_min, _max) | +| ramp up rate                                             | rampUpRate (+_min, _max)    | rampUpRate (+_min,_max) |  -  | rampUpRate (+_min, _max) | 
-| ramp down rate  | rampDownRate (+_min, _max)  |  | rampDownRate (+_min, _max) | +| ramp down rate                                           | rampDownRate (+_min, _max)  | rampDownRate (+_min,_max) |  -  | rampDownRate (+_min, _max) | 
-| trip time        | tripTime ExpertSettings      | tripTime  |+| trip time                                                | tripTime ExpertSettings     tripTime  |  -  | tripTime  |
 ^ **Acquisition**   ^^^^ ^ **Acquisition**   ^^^^
-| actual voltage (Istspannung) | voltageI                  | voltageI +| actual voltage (Istspannung)                             | voltageI       voltageI    -  | voltageI 
-| actual current (Iststrom)    | currentI                      | currentI | +| actual current (Iststrom)                                | currentI       currentI    -  | currentI | 
-| channel polarity   | polarity (char array: + or -) not used in the GUI, just for info purposes       | voltageI sollte das widerspiegeln +| channel polarity                                         | polarity (char array: + or -) not used in the GUI, just for info purposes   polarity {'+','-'} (config value, can't be queried!)    |  -  | voltageI sollte das widerspiegeln 
-| actual ramp up rate   | rampUpRateI       |   | +| actual ramp up rate                                      | rampUpRateI   rampUpRateI  |  -  |   | 
-| actual ramp down rate | rampDownRateI |     |   | +| actual ramp down rate                                    | rampDownRateI | rampDownRateI |  -  |   | 
-| demanded voltage on the device (Sollpannung die auf dem Gerät gesetzt ist)  | setVoltageHardwareI | | Es gibt bei CSCO immer wieder Überlegungen, ob der Sollwert nochmal mitgeschickt werden soll. Ich persönlich finde es überflüssig, ausser vielleicht, es ist der aus dem Gerät ausgelesene Sollwert. Aber da gibt es viele Meinungen. | +| demanded voltage on the device (Sollpannung die auf dem Gerät gesetzt ist)  | setVoltageHardwareI | setVoltageHardwareI  |  -  | Es gibt bei CSCO immer wieder Überlegungen, ob der Sollwert nochmal mitgeschickt werden soll. Ich persönlich finde es überflüssig, ausser vielleicht, es ist der aus dem Gerät ausgelesene Sollwert. Aber da gibt es viele Meinungen. | 
-| An/Aus des Kanals    | //not implemented//              |     | Ich glaube das sollte das powerState field in der Status property sein  rh: ist es| +| An/Aus des Kanals                                        | //not implemented//         |     |    | Ich glaube das sollte das powerState field in der Status property sein  rh: ist es| 
-| actual trip time     | tripTimeI         |   | +| actual trip time                                         | tripTimeI     tripTimeI    -  |   | 
-| actual current limit | currentLimitI |     |   |+| actual current limit                                     | currentLimitI | setCurrentLimitHardwareI    -  |   |
 ^ **Status**   ^^^^ ^ **Status**   ^^^^
-| Detailed status  | siehe unten |  | |+| Detailed status  | siehe unten |  |  |  |
 ^ Info (partly filled with the values from the configuration fields)  ^^^^ ^ Info (partly filled with the values from the configuration fields)  ^^^^
-| only one ramp rate?  | singleRampRate (bool) |  | | +| only one ramp rate?  | singleRampRate (bool) | singleRampRate (bool)    |  
-| minimum channel voltage   | minVoltage (queried from hardware) |  | | +| minimum channel voltage   | minVoltage (queried from hardware) | minVoltage (queried from hardware)      
-| maximum channel voltage  | maxVoltage (queried from hardware) |  | | +| maximum channel voltage  | maxVoltage (queried from hardware) | maxVoltage (queried from hardware) |    
-| maximum channel current  | maxCurrent (queried from hardware) |  | | +| maximum channel current  | maxCurrent (queried from hardware) | maxCurrent (manual config field via currentS_max_manual) |    
-| minimum ramp rate  | minRamp |  | | +| minimum ramp rate  | minRamp | minRamp |  -   
-| maximum ramp rate  | maxRamp |  | | +| maximum ramp rate  | maxRamp | maxRamp |    
-| resolution of the voltage measurement  | resVoltage |  | | +| resolution of the voltage measurement  | resVoltage | resVoltage |  -   
-| resolution of the current measurement  | resVoltage |  | | +| resolution of the current measurement  | resVoltage | resCurrent    
-| polarity   | polarity (char array: + or -)         |   | +| polarity   | polarity (char array: + or -)     polarity (char array: + or -)    |   -      
-| Number of the slot the card with the channel sits in | slotNumber (int32_t) |  | | +| Number of the slot the card with the channel sits in | slotNumber (int32_t) | slotNumber (int32_t) |    
-| Number of the channel on a card | channelNumber (int32_t) |  | |+| Number of the channel on a card | channelNumber (int32_t) | channelNumber (int32_t)    |  |
  
  
  
  
-==== Detailed Status Bits ====+==== MPOD::Detailed Status Bits ====
 In der MPOD Klasse werden momentan diese Bits ausgelesen und gesetzt. Teilweise verhalten sich die Bits nicht wie erwartet, z.B. "outputOn" zeigt nur true, wenn der Kanal eingeschaltet ist UND eine Spannung anliegt. Wenn der Kanal eingeschaltet ist aber auf 0V steht, ist das Bit false. In der MPOD Klasse werden momentan diese Bits ausgelesen und gesetzt. Teilweise verhalten sich die Bits nicht wie erwartet, z.B. "outputOn" zeigt nur true, wenn der Kanal eingeschaltet ist UND eine Spannung anliegt. Wenn der Kanal eingeschaltet ist aber auf 0V steht, ist das Bit false.
 Auf manchen Karten ist das outputAdjusting Bit immer an. Auf manchen Karten ist das outputAdjusting Bit immer an.
Line 76: Line 87:
 ACHTUNG: Bei den Failure Bits bedenken, dass gilt: ERROR_ON_FALSE und WARNING_ON_FALSE, d.h. bit gesetzt bedeutet alles OK! ACHTUNG: Bei den Failure Bits bedenken, dass gilt: ERROR_ON_FALSE und WARNING_ON_FALSE, d.h. bit gesetzt bedeutet alles OK!
  
 +==== CAEN::Kanal::Detailed Status Bits ====
 +
 +  * outputOn
 +  * outputRampUp
 +  * outputRampDown
 +  * outputOverCurrent
 +  * outputOverVoltage
 +  * outputUnderVoltage
 +  * outputExternalTrip
 +  * outputMaxVoltage
 +  * outputExternalDisable
 +  * outputInternalDisable
 +  * outputCalibrationError
 +  * outputUnplugged
 +  * outputOVProtection
 +  * outputPowerFail
 +  * outputTemperatureError
 +  * outputChannelOutOfRange
 +  * outputSlotOutOfRange
 +  * outputNoSuchBoard
 +  * outputAmbiguousConfig
 +  * outputInvalidCrate
 +  * boardPowerFail
 +  * boardFirmwareChecksumError
 +  * boardHvCalibrationError
 +  * boardTempCalibrationError
 +  * boardUndertempError
 +  * boardOvertempError
 +
 +==== CAEN::Crate::Detailed Status Bits ====
 +
 +TODO
  
 +[[ds:software|Back to software overview]]
ds/software/hv.1425284080.txt.gz · Last modified: 2015/03/02 09:14 by rhaseitl