Wiki
Sidebar
hi:hi:hestsis18blm
This is an old revision of the document!
These are setting which are safe for the detectors. They may be not the optimal for operation. If the corresponding channel trips one should investigate what is the reason.
PDC-SCI
The HV is selected based on the energy loss in the scintillator. As of 2.2.2020 one has to look at the scope: sdaos19.acc.gsi.de (use a web browser to access it)
Channel mapping:
| Channel | Detector |
|---|---|
| ch1 | GTE1DI1P |
| ch2 | GHHDDI1P |
| ch3 | GTH1DI4P |
| ch4 | GHADDI1P |
| ch5 | GHTCDI1P |
| ch6 | GHTCDI2P |
| ch7 | GHTPDI1P |
General values:
| Parameter | Value |
|---|---|
| Iset | 1200 uA |
| Vset | negative, less than 1600 V |
| Ramp Up | 30 V/s |
| Ramp Down | 30 V/s |
| Trip Time | 500 ms |
PDC-IC
General values:
| Parameter | Value |
|---|---|
| Iset | 40 uA |
| Vset | negative, 1000 V |
| Ramp Up | 30 V/s |
| Ramp Down | 30 V/s |
| Trip Time | 500 ms |
PDC-SEM
General values:
| Parameter | Value |
|---|---|
| Iset | 40 uA |
| Vset | positive, 100 V |
| Ramp Up | 30 V/s |
| Ramp Down | 30 V/s |
| Trip Time | 500 ms |
hi/hi/hestsis18blm.1580738702.txt.gz · Last modified: 2020/02/03 15:05 by p.boutachkov
