====== Concurrent Technologies VX 815/09x ======

===== BIOS and Boot Settings =====

**BIOS** access with F2

Default VMEbus settings need to be changed.\\
Otherwise, vmebus.ko fails to load as it cannot map enough contiguous memory.
  vme_bridge 0000:08:04.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
  vme_bridge 0000:08:04.0: PCI-VME bridge: V1.4 (May, 19 2010)
  VME Bridge: found TSI148 VME bridge rev 0x0001
  VME Bridge: Using IRQ 22
  VME Bridge: Not enough PCI memory space available: 10fffff
  vme_bridge 0000:08:04.0: PCI INT A disabled
  vme_bridge: probe of 0000:08:04.0 failed with error -12 
  

To allow for larger VME mappings set default values reserved bounds must be enlarged\\

  * **->** //Vme// 
    * Outbound  Reserved Size [64 MB]
    * Inbound Reserved Size [64 MB]

Both default values are set to 16 Mb. The maximum value is 256 Mb.\\
Consider the 64 Mb a first shot.