Differences

This shows you the differences between two versions of the page.

--- projects:maps:mapsadapter:overview [2012/01/11 14:20]
reeg [MAPS-Adpter Front View]
+++ projects:maps:mapsadapter:overview [2020/07/05 12:03] (current)
carsten [Related topics]
@@ Line 1: / Line 1: @@
+☚ [[projects:maps:overview| Zurück]] ★
 ====== MAPS Adapter ======
-The adapter consists of one 6U crate collecting 128 BCT signals on BNC connectors at the rear panel and one 3U "Rahmenpuls-Modul" collecting 128 gate pulses on it's rear panel.
+The adapter consists of one 6U crate which collects 128 BCT signals through BNC connectors at the rear panel, and one 3U "Rahmenpuls-Modul" collecting 128 gate pulses on it's rear panel.
 ===== Related topics =====
-The adpter is completely passive and is internally composed of several boards as shown below:
+The adapter is a completely passive device, and is internally composed of several boards as shown below:
 ^  Hardware  ^  Signals and Info  ^
 |  Internal 6U "[[projects:maps:mapsadapter:analogsignalmodul:overview|Analogue signal module]]"  ||
-| [[projects:maps:mapsadapter:analogsignalmodul:68amp_9lemo|68AMP_9LEMO]]\\  These 2x8 boards bundle analogue signals and measurement gate pulses into NI-cable | Flow of [[projects:maps:mapsadapter:analogsignalmodul:overview|"Messfenstersignal"]] and possible Choises there:\\   |
+| **"[[projects:maps:mapsadapter:analogsignalmodul:68amp_9lemo|68AMP_9LEMO]]"**\\  These 2x8 boards bundle analogue signals and measurement gate pulses into NI-cable | Flow of [[projects:maps:mapsadapter:analogsignalmodul:overview|"Messfenstersignal"]] and possible Choises there:\\   |
 |  Internal 3U "[[projects:maps:mapsadapter:rahmenpulsmodul:overview|Rahmenpulsmodul]]"  ||
-| [[projects:maps:mapsadapter:rahmenpulsmodul:rahmenplsback|Backplane "Rahmenpulsback"]] \\ This board collects "Rahmenpulse" from rear side and passes them internaly to the four ... | [[projects:maps:mapsadapter:rahmenpulsmodul:overview|Signals to PXI-7811R FPGA board]]:\\ MAPS-Bus-signals / Rahmenpulse |
+| **"[[projects:maps:mapsadapter:rahmenpulsmodul:rahmenplsback|Backplane "Rahmenpulsback"]]"** \\ This board collects "Rahmenpulse" from rear side and passes them internaly to the four ... | [[projects:maps:mapsadapter:rahmenpulsmodul:overview|Signals to PXI-7811R FPGA board]]:\\ MAPS-Bus-signals / Rahmenpulse |
-| [[projects:maps:mapsadapter:rahmenpulsmodul:amp68vg96|AMP68VG96]] \\ These four boards adapt the "Rahmenpulse" from the backplane via VG connectors to NI-VHDCI cables connected to the NI7811 FPGA-board.  |  |
+| **"[[projects:maps:mapsadapter:rahmenpulsmodul:amp68vg96|AMP68VG96]]"** \\ These four boards adapt the "Rahmenpulse" from the backplane via VG connectors to NI-VHDCI cables connected to the NI7811 FPGA-board.  |  |
-===== MAPS-Adpter Front View =====
+===== MAPS-Adapter Front View =====
 Empty seperated slots provide storage space for the quite rigid NI multiline cables, which are available only in fixed lengths. That should provide more acurateness appart from the great number of this cables. Hole adapter interfaces between the digitizer signals analog signal and "Rahmenpuls" and the NI-crate:  \\
@@ Line 21: / Line 23: @@
 {{ :projects:maps:rueckseiten.jpg?nolink&800 |MAPS-Adapter back}}
+☚ [[projects:maps:overview| Zurück]] ★

GSI - BEA Wiki

User Tools

Site Tools

Differences

Page Tools